Enquire Now

CNC Vertical Machining Centre

MANUFACTURER Hurco (manufacturer's website)
RESTRICTIONS To be used by Wolfson Services Technicians Only
TRAINING Although training is required to use this item, we cannot arrange it for you.
CALIBRATED Yes, this item is calibrated.
Last Calibration: 6th August, 2012
CUSTODIAN Robert Smith
Enquire about this item
SITE West Park


The VM series of 3-axis machining centers features a small footprint with a large work cube. No other mill packs as much productivity into such an efficiently designed package.

Hurco’s Control Gets You from Print to Part Faster

Even though the VM Series machining centers have a single screen control versus the dual-screen found on the higher performance machining centers, you still get the benefit of all the powerful features that maximize productivity. Some favorites are listed below.

  • DXF Transfer is the easiest and fastest way to get the part program into the control. Simply import the CAD image, select the desired features, and the WinMax control automatically creates the program. *Eliminate data entry mistakes and save valuable time.
  • AutoCalc automatically trigs out the missing information from a print. No trig or calculator needed.
  • Program Interrupt stops cutting, retracts the tool, and allows you to jog any axis. With just two keystrokes, the tool resumes cutting right where it left off. Just like a true program interrupt button should behave.
  • Concurrent Programming makes it possible to program the next part while the machining center is running another part without interrupting the cycle.

Technology never stops and neither do we. Hurco engineers continually find ways to develop software features that increase customer profitability. A few of the most recent control features are highlighted below.

  • UltiMotionTM reduces cycle time by up to 30% while significantly increasing surface finish quality.
  • UltiMonitorTM allows remote monitoring of your machine from any web browser. See the control screen or video from a USB camera at the machine.
  • Absolute Tool Length allows tool setup to be independent from the part and machine, which means the tool information only needs to be captured once allowing the tool to be used on other machining centers. *Facilitates the use of an offline tool presetter.
  • Tool Change Optimization is a new feature that analyzes the part program and automatically reduces the number of tool changes by rearranging the program for optimal efficiency.


X, Y, Z Axis Travel40 x 20 x 20 in - 1016 x 508 X 508 mm
Spindle Nose to Table4 in - 102 mm
Table Size46 x 20 in - 1168 x 508 mm
Max Weight On Table1200 lbs - 544 kg
T-Slot Size18 mm
Peak Spindle Motor20 hp - 15 kW
Max Spindle Motor Torque10k ; 75 ft lbs - 102 Nm @ 1,450 rpm
Number Of Tools Standard20
Tool TypeCAT 40
Max Tool Diameter3.5 in - 89 mm
Max Tool Length9.8 in - 250 mm
Max Tool Weight15 lbs - 6.8 kg
Max Programmable Feedrate300 in/min - 7.6 m/min
Rapid Traverse X,Y,Z Axis945 in/min - 24 m/min,945 in/min - 24 m/min,945 in/min - 24 m/min
Machine Height101.5 in - 2576 mm
Required Floor Space143.7 x 105.5 in - 3650 x 2520 mm
Machine Weight9039 lbs - 4100 kg

Item ID #2105.

Last Updated: 21st September, 2012

CNC Vertical Machining Centre