Deprecated: Creation of dynamic property ItemRenderer::$_wikiparser is deprecated in /data/sites/equipment/webroot/app/classes/itemrenderer.php on line 20
Enquire Now

Simulation Manikin

MANUFACTURER Laerdal (manufacturer's website)
MODEL Sim Man (211-00050)
AVAILABILITY Upon Request
TRAINING Training is required to use this item and we can arrange this if needed.
CUSTODIAN Mahroo Eftekhari
Enquire about this item
SITE West Park

Description

SimMan is a full body, adult manikin that allows the simulation of Basic and Advanced Life Support Skills and Assessment to develop both individual and team skills.

The simulator allows observation and recognition of most vital signs which are used in emergency medicine either directly on the manikin itself or on the included simulated Patient Monitor. When used correctly, these features will support the students’ competence ability to reach the correct diagnosis based on active observation as opposed to being prompted by instructor cues. The patient monitor also doubles as display for other functions, such as display of 12-lead ECG and X-rays.

The manikin allows for most relevant medical intervention to be performed according to their medical guidelines and protocols. The Laerdal SimMan contains an advanced airway allowing for simulation of difficult airway management cases. The anatomy can be changed during the scenario (via remote control) to indicate changes to the patient condition or as a response to students’ intervention. Correct form and technique are required to perform direct laryngoscopy and endotracheal intubation. Correct use of a variety of airway adjuncts will successfully ventilate the patient simulator.

SimMan is delivered with a set of normal pupils inserted in the head's eye sockets and a separate case containing 3 sets of replacement pupils (normal, constricted, dilated) for simulation of various medical conditions. The simulated patient monitor is a replication of the Philips IntelliVue patient monitor, which includes the ability to set up the screen layout in various ways. It also allows configuration outside the IntelliVue’s features to mimic other patient monitor types as well.

SimMan is operated through a Software (SW) which runs on a PC. Interaction with the SW is done through a Graphical User Interface (GUI) where the various vital signs parameters are changed directly or through pre-programmed scenarios. The SW also allows automatic and manual logging of scenario events as well as video capture. The events logged during a scenario can be shown in a debrief viewer together with video capture. The log is synchronized with the video capture. This allows the instructor to review both the log and actual performance during debriefing. The debrief can also be stored for later review.

Specification

Operational RequirementsVoltage RequiredCurrent
Link Box
(Cat. Number 380100)
Input
Output


110/230 VAC
12 VDC


1.4 A 50/60 Hz
5.0 A
Patient Monitor 17” ELO
(Cat. Number 245-950xx)
Input (power supply)


100-240 VAC


50W 50/60 Hz
Compressor
(Cat. Number 210-01150)
Input Voltage
(Cat. Number 210-01050)
Input Voltage


110 VAC

230 VAC


1.9 A 60 Hz

1.0 A 50Hz
Air outlet - 1.1 bar +/- 10%
CO2 outlet - 0.7 bar +/- 15%
Equipment Weight KilogramsPounds
Manikin23kg50.4lbs
Legs, 2 each total6.5kg14.3lbs
Link Box2.4kg5.3lbs
Patient Monitor10.4kg22.92 lbs
Compressor16kg35.2lbs
Equipment Maximum Noise LevelDecibel
Link Box66db
Manikin60db
Patient Monitor55db
Compressor88db
Note: Noise levels were measured with in 3 inches of each device.
Interconnection CablesType
Link Box to:
Manikin
Computer

15 Pin Serial
9 Pin Serial
Computer to:
Patient Monitor
Audio
Touch Screen

15 Pin SVGA
3.5mm Stereo
USB 2
Power Cables Provided (Standard Wall)Type with earth
Link Box (380100)US/Europe
Patient Monitor (245-950xx)US/Europe
Compressor (210-01150)US
Compressor (210-01050)Europe
Environmental condition:
Operating temperature+10 to +40 °C
Storage temperature-15 to +50 °C
Humidity15 to 90% RH (non-condensing)

Item ID #1772.

Last Updated: 25th September, 2012

Simulation Manikin